Nexans XKDT-F Armoured 3 core cables XLPE insulated

Applications

• Underground distribution networks
• Pipe laying and ground laying
• Installation in electrical substations

Construction

• Round copper or aluminium conductor
• Extruded inner conductor
• Cross-linked PE insulation (XLPE)
• Extruded outer semi-conductor
• Semi-conductive swelling tape
• SZ concentric copper wire screen
• Swelling tape
• Black PE outer sheath, with 2 red longitudinal stripes
• Three-pole construction:
• Assembly of three monopolar cables
• Extruded filler
• Galvanised flat steel wire armouring

Properties

• Longitudinal sealing by two layers of tapes which swell in the presence of moisture and prevent the spread of water in the event of an injury to the sheath
• Outer jacket made of specially abrasion-resistant PE with a low shrinkage rate
• Cross-linked PE insulation (XLPE) with high dielectric strength and low losses
• Halogen free
• Tensile armouring made of zinc-plated flat steel wires, suitable for installation on steep slopes or if mechanical protection of the cable is required