XKDT 1x240 Cu/35 mm² 12/20kV
XKDT 1x240 Cu/35 mm² 12/20kV
Medium voltage 20 kV single-core cables with cross-linked PE insulation (XLPE) and copper-wire screen.
Read more- Nexans ref. : 10152577
- EAN : 7611755050733
Description
Description
Standards
-
ProductHD 620 S2 P10N; IEC 60228 Class 2 ; IEC 60502
Applications
- Underground distribution networks
- Laying in tubes and direct buried
- Arises in electrical substations
Key points
- Halogen free
- Outer PE sheath especially abrasion-resistant and low shrinkage
- Longitudinally watertight ensured by a tape which swells in the presence of moisture and prevent the spread of water in case of injury to the sheath
- XLPE cross-linked insulation high dielectric strength and low loss
Construction
- Copper conductor
- Inner semi-conductor extruded
- Cross-linked PE insulation (XLPE)
- Outer semi-conductor extruded
- Semi-conductive swelling tape
- Copper wire screen SZ
- Swelling tape
- Outer PE sheath black + 2 red lines
Notice
- Other cross-sections and voltage on request
- Noflamm sheath possible on request
admissible load MV cables
Currents are indicative and given for normal service conditions.
- Permanent charge 24h at 100% LF =1.0
- Conductor temperature 90 ° C
For cable laid in earth in tubes
- Depth of laying in soil : 1.0 m
- Max. soil temperatureempérature : 20 °C
- Soil thermal resistivity: 1.0 °C m/W
For cables placed in the open air
- Max. air temperature : 30 °C
- Protected from direct sunlight
- laid on consoles or cable trays
Grounding:
-
at one end, in this case the induced voltage increases proportionally with the length of the
the link.Attention, too high induced voltage can cause a breakdown of the outer sheath during overvoltages
transient. -
Either at both ends, which generates circulating currents and therefore more or less acceptable losses..
Correction factor
If the terms of service differ from those set out above, allowable currents must be corrected
taking into account all the correction factors that apply to the installation and service conditions encountered.
Main factors to consider are the following:
- Variable load, factor taking into account variable load, 10h to 100% and 14h to 60% LF= 0.627
- Operating temperature
- Ambient Temperature
- Thermal soil resistivity, factor taking into account the thermal resistivity of the soil in [°C * m / W]
- Magnetic armor
Our engineers are at your disposal to help and advise you.
Characteristics
Characteristics
Construction characteristics
Construction characteristics
Conductor flexibility
Class 2
Conductor material
Copper
Conductor shape
Round compacted
Dimensional characteristics
Dimensional characteristics
Conductor cross-section
240 mm²
Conductor diameter
18.4 mm
Average insulation thickness
4.8 mm
Diameter over insulation
29.0 mm
Screen section
35 mm²
Diameter over external conductor / metallic screen
32.8 mm
Average sheath thickness
2.2 mm
Nominal outer diameter
37.5 mm
Approximate weight
311.0 kg/100m
Number of cores
1
Electrical characteristics
Electrical characteristics
Rated Voltage Uo/U (Um)
12/20 kV
Maximum operating voltage
24 kV
Max. DC resistance of the conductor at 20°C
0.0754 Ohm/km
I max. @ 60°C-buried, flat, spaced, earthing 1pt, LF1
425 A
I max. @ 60°C-buried, flat, spaced, earthing 2pts, LF1
365 A
I max. @ 90°C-buried, flat, spaced, earthing 1pt, LF1
545 A
I max. @ 90°C-buried, flat, spaced, earthing 2pts, LF1
481 A
I max. @ 60°C-buried, trefoil, joined, earthing 1pt, LF1
377 A
I max. @ 60°C-buried, trefoil, joined, earthing 2pts, LF1
366 A
I max. @ 90°C-buried, trefoil, joined, earthing 1pt, LF1
486.5 A
I max. @ 90°C-buried, trefoil, joined, earthing 2pts, LF1
474 A
I max. @ 60°C-in the air inside, flat, spaced, earthing 1pt, LF1
524.8 A
I max. @ 60°C-in the air inside, flat, spaced, earthing 2pts, LF1
486 A
I max. @ 90°C-in the air inside, flat, spaced, earthing 1pt, LF1
478.8 A
I max. @ 90°C-in the air inside, flat, spaced, earthing 2pts, LF1
705 A
I max. @ 60°C-in the air inside, trefoil, joined, earthing 1pt, LF1
459 A
I max. @ 60°C-in the air inside, trefoil, joined, earthing 2pts, LF1
451 A
I max. @ 90°C-in the air inside, trefoil, joined, earthing 1pt, LF1
658 A
I max. @ 90°C-in the air inside, trefoil, joined, earthing 2pts, LF1
650 A
Permissible short circuit current conductor 0.5s
49 kA
Permissible short circuit current conductor 1s
34.8 kA
Permissible short circuit current screen 0.5s
6.4 kA
Permissible short circuit current screen 1s
4.7 kA
A.C. Conductor resist. 50Hz and at 90 °C
0.097 Ohm/km
Nominal phase capacitance
0.355 µF / km
Nominal inductance
0.34 mH/km
Phase reactance 50 Hz - trefoil formation
0.106 Ohm/km
Impedance at 50Hz and 90°C
0.14 Ohm/km
I max. @ 60°C-buried, trefoil, joined, earthing 1pt, LF0.627
409.9 A
I max. @ 90°C-buried, trefoil, joined, earthing 1pt, LF0.627
530.5 A
Mechanical characteristics
Mechanical characteristics
Maximum pulling force by laying
14.4 kN
Usage characteristics
Usage characteristics
Minimum installation temperature
-5 °C
Bending factor when laying
15 (xD)
Bending factor when installed
9 (xD)
Maximum operating temperature
90 °C
Short-circuit max. conductor temperature
250 °C
Resources
Resources
Documentation
Accessories - XKDT 1x240 35 Cu
pdf — 143.1 kB
Declaration of Performance
- Declaration of Performance n� : 1000393-CHCD
- Certification Date : 3/1/23
- AVCP (Assessment and Verification of Constancy of Performance) : System 4
- Declared performance : Fca
Our websites
Select your country to find our products and solutions
-
Africa
- Africa
- Ghana
- Ivory Coast
- Morocco
- North West Africa
- Americas
- Asia
- Europe
- Oceania